NeoCharge logo
NeoCharge logo

All articles

Smart Splitter Quick Start GuideUpdated 2 months ago

Quick Start Guide - PDF Version

Quick Start Guide (3).pdf2.2MB


What's Included:

  • Smart Splitter (1x)
  • Mounting Bracket (1x)
  • Bracket Screws (2x)
  • Thumb Screws (2x)
  • Panhead Screws (2x)

Important Pre-Installation Notes:

  • Always ensure the circuit breaker is OFF before installation
  • Maximum amperage of each EV/device must be less than or equal to 80% of the breaker rating (Example: 40A on 50A circuit)

How It Works:

  1. The Primary outlet is always active
  2. The Smart Splitter monitors total power draw
  3. Automatic shut-off of Secondary outlet when Switching Limit* (calculated by adding PRI + SEC side loads) is exceeded
  4. Resumes power to Secondary when Primary stops drawing power

Circuit Breaker Guide:

Circuit BreakerSwitching Limit*Max Load (each outlet)
50 Amps44 Amps40A on Pri / 32A Recommended for Sec (max 40A)
40 Amps34A32A
30 Amps10A24A
20 Amps10A26A


Installation Steps:

  1. Turn Breaker OFF

- Locate and turn off the circuit breaker controlling your 240V outlet

  1. Install Mounting Bracket (Optional)

- Remove existing faceplate screws

- Align mounting bracket with outlet

- Secure using provided bracket screws

- Ensure bracket slots align with gold mounting points on Smart Splitter

  1. Plug In Smart Splitter

- Insert Smart Splitter into outlet

  1. Secure Smart Splitter (Optional)

- Use either thumb screws or panhead screws to secure to mounting bracket

  1. Plug In Devices For Appliance x EV setup:

- Plug appliance into primary ("PRI") outlet

- Plug EV charger into secondary ("SEC") outlet

For Dual EV setup:

- Plug priority EV charger into primary ("PRI") outlet

- Plug secondary EV charger into secondary ("SEC") outlet

  1. Turn Breaker ON
  2. Configure Devices In App

- Download and open the NeoCharge app

- Create an account

- Follow in-app instructions to connect Smart Splitter to Wi-Fi

- Confirm your circuit breaker to set correct switching limits (required)

- Configure your devices to complete setup

8. Integrate Your Charging And Utility

- Set your home locations to enable automatic charging schedules

- Verify your utility and rate plan (Time-of-Use, etc.)

- Set your preferred charging hours

- Enable automatic scheduling for optimal energy bill savings


Was this article helpful?
Yes
No